Skip to main content
Faster Hot Water

DRS-S Operating Instructions

The Dedicated Recirc System – Standard is an on-demand hot water circulation system.  That means that it only runs when there is a need, or demand, for hot water somewhere in your home.

How to Use the System:

The Dedicated Recirc System – Standard uses our proprietary protocol we call Faucet Activated Smart Technology (F.A.S.T.).

Step 1.  Turn on any hot water faucet for 1 second, then turn it off.
Step 2.  Wait approximately 30 to 45 seconds (typical results, yours may vary) and turn the faucet back on and hot water will be waiting for you.

Once the system is activated by turning on any hot water faucet the pump will continue to run for 3 minutes (this time is adjustable).  3 minutes is long enough to heat up the circulation loop so that when you turn the faucet back on hot water will be available.

This applies to every hot water faucet in your home.  Here is an example:

If you are in the kitchen and decide to take a shower you can reach over and turn on the kitchen sink faucet for 1 second, then turn it off.  By the time you get to the shower hot water will be waiting for you.

If you have any questions please email us at How.It.Works@FasterHotWater.com or give us a call at (619) 786-2830.

 

  • Was this article helpful?