Skip to main content
Faster Hot Water

WaterQuick Tankless Product Overview

Purchase here button.png
WaterQuick Tankless was designed for tankless water heaters and will work with multiple dead-end plumbing lines.  The easy installation can be performed by professional installers like a plumber or a handyman or as a DIY project.

How it Works Hot Water Circulation System Components

All of our tankless products have a water flow switch that turns the pump on and off automatically.  

Here is a simple explanation of how it works (see more detailed explanation to the right):

  1. Turn on any hot water faucet for 1 second, then off.
  2. Wait about 30 to 45 seconds.
  3. Turn on any hot water faucet and you will have hot water waiting for you without wasting more than a cup down the drain.

There are several gallons of water in your water pipes between the water heater and your sink or shower.

The longest wait may be in your kitchen or bathroom on the other side of the house from the water heater.

The cool water in your hot water line must be moved out of the way before you get hot water.

There are 3 choices where it can go:

  1. Down the drain.
  2. Catch it in a bucket to flush your toilets or water your plants.
  3. Use the cold water line to return it to the water heater.

Choice #3 is the best choice and can be accomplished with a hot water circulating pump.

WaterQuick Tankless  hot water circulation system is the first "true on-demand" hot water circulating system for existing or new homes that delivers hot water fast without wasting water down the drain and is started by turning on a hot water faucet just like a tankless water heater. 

A "true on-demand system" is a system that is started by a demand for hot water.  Other systems require you to push a button, use a remote or have the pump on a timer to start delivering hot water.

All of our systems use a proprietary protocol we call:

Faucet Activated Smart Technology™ (F.A.S.T.)

That is, when any hot water faucet in your home is turned on for 1 second and then off, the circulation pump starts pushing hot water out to your furthest fixtures. 

How it works (see the simple explanation to the left):

A small, high speed, ultra-quiet circulation pump is installed on the hot water outlet or the cold water inlet of a tankless water heater.  Then a flow switch which we call a Flow Monitor is attached to the pump.

When water flow is sensed that means someone in the house needs hot water and the Flow Monitor turns the recirc pump on.  This is the only system that monitors the water use to turn the pump on and off.

A Bridge Valve is installed under the furthest sink.  Bridge Valve connects the hot and cold water supply lines under the most remote kitchen or bathroom sink in the house.

The Bridge Valve has a temperature sensor built into it and opens and closes the valve based on the water temperature.   The Bridge Valve does not require electricity and takes up very little space under the sink.

When the Flow Monitor detects hot water use anywhere in the house, it turns on the hot water pump. The cool water that normally would go down the drain is circulated back to the water heater through the Bridge Valve and into the cold water line.

The pump will turn off when the Bridge Valve is filled with hot water and when all hot water faucets have been turned off.  The pump will always run when a hot water faucet is open.


Circulation Pump

Chinese pump transparent.png

Flow Monitor

Flow Monitor MT.png

Bridge Valve

BV angle view MT.jpg

Custom Shut-off Valves

Angle Stops.png

Custom Supply Lines

Supply Lines solo.png

  • Was this article helpful?