Skip to main content
Faster Hot Water

Product Overview and Specs

Product Overview


The WaterQuick Tankless is the first "true on-demand" hot water circulating system designed for use with tankless water heaters in homes without a dedicated hot water return line (includes many existing homes).

A small, high speed, ultra-quiet hot water circulation pump is installed on the hot water outlet of a tankless water heater. A Bridge Valve connects the hot and cold water supply lines under the most remote kitchen or bath fixture in the house.

When the integrated Flow Manager detects hot water use anywhere in the house, it turns on the hot water pump. The cool water that normally would go down the drain is circulated back to the water heater through the cold water line.

The Bridge Valve has a built-in temperature sensor that closes when hot water reaches the farthest sink. Unless a hot water faucet is on the Water Monitor will turn off the pump because hot water is everywhere you need it!

Advanced Bridge Valve        

An Advanced Bridge Valve allows as much as 30% more water flow so the cool water in the hot line can be moved back to the water heater faster and is required to keep a tankless water heater running.


Specifications 

Pump Technical Data:

Flow Range:    0 to 10 US gpm
Head Range:    0 to 20 US feet
Motor    Single phase, 115 vAC
Min. Fluid Temp.    36° F (2° C)
Max. Fluid Temp.    230° F (110° C)
Max. Working Pressure    145 psi

Electrical Data:

Volts    115 vAC
Watts:    93W
Amps    0.81A
Electrical Connection:    10 foot cord; 115 vAC plug
 

3 Speed Circulation Pump
Speed I II III
Head (Ft) 13 60 20
Power (W) 46 67 93

 

  • Was this article helpful?